Landscaping the school grounds

« Back to Home

Snow Blowing Tips To Help You Remove Snow Off Your Driveway Effortlessly

Posted on

Snow blowing is an effective way of removing snow off your driveway provided you take the necessary precautions. Also, using the right technique to remove the snow significantly reduces the workload. Below are some essential snow blowing tips that can help you finish your snow blowing task fast and without much difficulty. 

Maintain the Right Pattern

It's important that you remove the snow outwards when snow blowing. Starting to remove snow from the middle is an effective way of ensuring snow is pushed away from the cleared areas. You may also want to create a clear strip at the middle as you begin, so that you can mark off a starting point and proceed from that area.

Also, for you to achieve a clear finish after snow blowing, you may want to overlap the blowing tracks. So let your snow blower touch on the previously cleared track, so that you won't have strips of snow remaining behind between the snow blowing tracks.

Take Your Time

You should maintain a slow and consistent pace when clearing the snow. Your snow blower is likely to clog severely if you move too fast, especially in deeply layered snow. As a result, you will end up spending more time than necessary because unclogging a snow blower can be quite tedious.

Also, avoid taking a pass with the full width of your snow blower. Instead opt for about one-half or one-third machine width to reduce the chances of clogging it. Also, using a fraction of your machine's full width will help you to move fast. The machine is also able to throw snow that has been removed farther than when the machine is set at full width, advises Family Handy Man.

Prepare Your Snow Blower

It's critical to prepare your snow blower for use, so that you can prevent damages that result from poor maintenance or servicing. First, fueling your machine sufficiently is essential, so that you won't have to stop working and refill the fuel tank. Also, if one tank of fuel may not be enough to remove snow on the entire driveway, then you may want to place a backup fuel can in a safe place on your driveway for convenient refilling.

Also, make sure that the oil in the snow blower is sufficient for machine operation throughout the entire snow removal process. If you don't refill the oil to the recommended level, you will likely damage your snow blower. Also, if the oil has overstayed in the machine, then you may want to empty the old oil and refill it with fresh oil just in case the oil present is already expired.

Using the right snow blowing technique and observing precautions can make your work easy. You can use the above mentioned tips to help you carry out snow blowing effectively.  


Share